Use this transparent “no sew” bonding material to adhere patches, appliqués and embroideries to most fabrics without stitching!

Press N Bond® Ultra withstands laundering and dry cleaning and will create a permanent bond between fabric surfaces when heat is applied. NO sewing is required! Press N Bond® Ultra adheres to Vinyl, Polyester, Cotton, Polycotton and most other fabrics. Testing is always recommended to ensure the fabric or textile is compatible.

Description and Instructions:

Use this transparent “no sew” bonding material to adhere patches, appliqués and embroideries to most fabrics without stitching!

Press N Bond® Ultra withstands laundering and dry cleaning and will create a permanent bond between fabric surfaces when heat is applied. NO sewing is required! Press N Bond® Ultra adheres to Vinyl, Polyester, Cotton, Polycotton and most other fabrics. Testing is always recommended to ensure the fabric or textile is compatible.

Designed to work with :

• Digital & Laser Cutters
• Printable with Inkjet Printers

Application Instructions for Household Iron:

1. Preheat iron to Cotton setting. Steam is not needed.
2. Cut Floriani Press N Bond Ultra sheet slightly smaller than fabric.
3. Place the Floriani Press N Bold Ultra on flat ironing surface with the shiny side facing up. The backing sheet (printed Place This Side Down) should be facing the ironing surface.
4. Place fabric over Florian Press N Bond Ultra. Press iron straight down and hold for approximately 10-15 seconds to anchor fabric to adhesive. Move the iron back and forth over entire fabric surface to bond layers together.
5. Turn over the fused layers and iron again from paper backing side. Use of a press cloth is recommended to prevent the possibility of transferring printing to fabric.
6. Let fused fabric & Floriani Press N Bond Ultra cool completely. Cut using preferred method .
7. Remove the white Floriani Press n Bond Ultra backing sheet.
8. Place the fused element on base fabric, adhesive side of the element over the base fabric. Press for approx 10-12 seconds.

Heat Press Instructions:

1. Temperature setting: 345 degrees Fahrenheit
2. Pressure setting: medium
3. Place Floriani Press N Bond Ultra backing side down, exposed adhesive facing up. Place fabric wrong side to Press N Bold Ultra adhesive. Press for
4. Seconds. Remove from press, let cool completely. Cut using preferred method.
5. Remove the white Floriani Press n Bond Ultra backing sheet.
6. Place the fused element on base fabric, adhesive side of the element over the base fabric. Press for 8-10 seconds.

Available sizes:
FPNBU   –   10” x 10 yards (24.40 cm x 9.14 m)