Floriani Wet N Gone is a fibrous water
soluble stabilizer and does a superior job of supporting
dense designs. Embroider most free standing lace with
just one layer! Floriani Wet N Gone's clean rinse capability makes it the
best choice when using it with delicate fibers such as
yarn scarves or English netting. It is now available in
a fusible version.
*Use the fusible version on sheer fabrics such as organdy,
organza, lame, sheer silks and more to establish a solid
type fabric that is easier to hoop and embroider. Once
the embroidery is complete, all the stabilizer rinses
away and will not shadow through.
- Create free standing lace and use just one layer
for most designs
- Perfect for making appliqués, decorative
pins and/or 3-D embroidery.
- Rinses clean leaving no messy residue
- Use as a topping for wide satin stitch designs
on high pile fabrics for perfect results!
To use Wet N
Gone Fusible:
- Fuse one layer of the stabilizer on to the back
of the fabric. Be sure to use a piece at least one
inch larger than the outer parameter of the hoop to
insure proper stabilization.
*Important- Use a low temp (260°, silk)
setting on your iron. Do not touch the surface of
your iron to the Wet N Gone Fusible, use a press cloth
(muslin or cotton). Press quickly! It is not necessary
to hold the iron to the fabric for more than three
seconds.
- Repeat steps 2-4 from above.
