Stitch N Wash Tearaway Fusible Embroidery Stabilizer
Name
Size
Cost
Quantity
Stitch N Wash Tearaway Fusible Embroidery Stabilizer is a 1.5 oz fusible tear away embroidery stabilizer that is ideal
for airy, open work type embroidery designs on light cottons
and linen. Stitch N Wash is unique because it is made up of half soluble
and half non-soluble fibers. By wetting the design once
it is complete the stabilizer is easily torn away without
distorting stitches or harming the delicate fibers of
heirloom quality fabrics. The design will retain the non-soluble
part of Stitch N Wash Tearaway Fusible Embroidery Stabilizer throughout the life of the garment
keeping the embroidery looking smooth. Any remnants of
the stabilizer around the design will wash out in the
laundry. Try the new fusible version of
Stitch N Wash when doing embroidery on loosely woven versions
of the fabrics mentioned above that tend to shift during
the hooping and embroidery process. By fusing the Stitch
N Wash on to the back of the fabric, it will aid in keeping
the fabric taut. This version also eliminates the need
for basting or messy spray adhesives.
Easy to remove from around delicate embroidery
or machine stitching.
Won't shadow through light colored fabrics.
Eliminates countless hours of "picking"
out stabilizer remnants.
Super stable and will support about 8,000 stitches
if the design is well-digitized.
To use Stitch N
Wash Fusible:
Fuse one layer of the stabilizer on
to the back of the garment. Be sure to use a piece
at least one inch larger than the outer parameter
of the hoop to insure proper stabilization.
*Important - Use a low
temp (260°, silk) setting on your iron. Do not
touch the surface of your iron to the Stitch N Wash,
press from the fabric side or use a press cloth (muslin
or cotton).
Hoop the garment and stabilizer. Try
to achieve "tight as a drum" tension.
Embroider the design. *Tip
- If the design is denser than 8,000 stitches or if
it is a poorly digitized design (too many stitches
for designs size), float an additional layer of Floriani
Stitch N Wash between the hoop and the bed of the
machine for each additional 8,000 stitches for added
support!
Remove the hoop from the machine
and from the garment.
Wet around the edge of the design
using a sponge, foam paint brush or envelope sealer.
Tear away as much of the Stitch N
Wash as possible.
Stabilizer remnants will wash out
in the laundry with a mild detergent and agitation.
