Floriani Cutaway Stabilizer is a 2 oz embroidery stabilizer.
It is manufactured using a unique process called the "Delta
Wet Laid Non-Woven" technique. The benefit of using this
method of production is that Floriani Cutaway is very solid, when
closely examined you will see no thick and/or thin spots. When
used as an embroidery stabilizer, it is not necessary to use
multiple layers in random directions to support stitches. Cutaways
are ideal for fabrics that are considered un-stable; fabrics
such as fleece, t-shirts, sweatshirts, polo knit, etc. Floriani
Cutaway is a very soft yet solid stabilizer that will
support medium to heavy stitch count designs.
Use on non-stable stretch fabrics
Will support a design density of about
14,000 stitches and well digitized.
Super soft feel makes it ideal for sweatshirts,
fleece and sweater knits.
Available in a fusible version which
eliminates the need for spray adhesives or basting.
To use Floriani Cutaway:
Cut a piece of the stabilizer at least one inch
larger than the hoop size you are planning to use.
Hoop the stabilizer to the wrong side of the fabric. Note! If using the fusible version, use a low
temp dry iron (260°, silk)to adhere to
stabilizer to the back side of the fabric.
Place the embroidery frame on the machine and complete
the design.Note!If
the design is denser than 14,000 stitches or if it
is a poorly digitized design (too many stitches for
the designs size), float an additional layer of Floriani
Tearaway between the hoop and the bed of the
machine for each additional 10,000 stitches for added
support.
Once the design is complete, remove the hoop and
garment from the machine and trim the stabilizer close
to the design. If you have fused the stabilizer to
the garment, apply heat and then pull it to the designs
edge before trimming.
